8.5 10 Bolt Braced

If you run a limited weld type build, where you can have a braced rear-end but need it to survive under the car with stock trailing arms the braced 10-bolt is a good budget friendly package.

10 bolt starts with an 8.5” c-clip housing from a 71-76 full size GM.  The housing is outfitted with our billet housing end/ axle savers to house the 35 spline hobby stock axle shafts.  The rear-end is assembled with billet main caps, a new spool, bearings and gear ratio of your choice.  Fabrication is rounded out with fully welded back brace, threaded coil spring perches, HD lower suspension mounts, shock mounts and a pinion brake.

There are upgrades/downgrades that you can change on this package:

• Add 3/8” truss brace
• Add Top brace
• Switch to removable retrofit axle savers instead of the billet housing end/axle saver combo
• 10 lug stud axles

Rear-end comes to you filled with fluid, broken-in and ready for punishment.

Standard build Includes the following:

• 33/35 spline Moser Hobby Stock axle shafts with bronze bushings and HD retainer plates
• billet housing end/axle saver
• Billet main caps
• Threaded coil spring perches
• New 1/2″ wall DOM axle tubes
• Full spool with gear ratio of your choice and all new bearings
• Pinion brake
• Back brace
• HD leaf coil lower trailing arm mounts
• New upper ear bushings

(prices based on usable housing core exchange)